BESAFE iZi Combi X3 ISOfix Bedienungsanleitung PDF herunterladen (Seite 4)

6 7

(3)

(4)

Install the front brace by sliding the two pins in the holes of

the belt guiding hook. Move the front brace inwards with the

ratchet, not further than the stop sign. The ratchet is used to

adjust the front brace in both directions. Slide the knobs (see

red circle) on the ratchet up or down to change direction (4).

(4)

(5)

Assemble the ﬂoor support before you install the seat in

your vehicle.

The ﬂoor support must go through the belt loop. The belt loop

must also be led into the hook on the ﬂoor support (5).

Do not fasten the locking bolt yet.

Place the seat sideways into the car with the front brace

towards you.

Push the ﬂoor support down to the ﬂoor.

Turn the seat into the right position (with the front brace

against the back rest).

10-

11-

12-

13-

14-

Pull both ISOﬁx connectors as far out as possible (6).

The switch will go into the lowest position and locks the

ISOﬁx connectors.

Click the ISOﬁx connectors in the ISOﬁx anchorage of the

vehicle (7). Make sure that both indicators are green (8).

(6)

Adjust the ﬂoor support so it

is in contact with the ﬂoor of

the vehicle (9).

(9)

(7)

(8)

click!

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

BESAFE iZi Combi X3 ISOfix Bedienungsanleitung Seite 4